STANDARD
FEATURES
- Computerized strength staging. (must be done
at the factory)
- Rated for 90 mph wind load per ASCE Standards
- Higher wind zones available
- Strength stages 0 through 6 available
- Velvet gray polyester powdercoated finish
- Tubular steel construction
- Bolt-together lengths 10 feet fall
- Interior Cross Braces for towers that do not
have an elevator leg installed inside the tower
- Hardware to assemble tower sections furnished
- Bolt together design for economical shipping
- Completely Free Standing - no guy wires to
clutter your facility
STANDARD
SIZES
- 4-column 4' x 4' - Engineered
for Stability in Grain Piles
- 4-column 8' x 8'
- 4-column 10' x 10'
- 4-column 12' x 12'
- 4-column 16' x 16'
AVAILABLE
OPTIONS
- Bolt-on U-Lugs for ease
of Attaching tower to elevator leg.
- 4-column tower sizes
2' x 4' up to 16' x 16'
- 6 or 9-column tower configurations.
- Custom tower sections
in 5' and 8' tall.
- Access Braces allow easy
access through the side of tower.
- Spiral Stairways
- Switch-Back Stairways
- Tower Side Walkways/Access
Platforms: 24" or 48" wide walkway for outside face
of tower. Toeboards standard on both sides of the walkway.
- Stairway Double-width
Top Landings allow access into the tower from the stair system.
- Galvanized finish or
custom color finish .
- "Coastal finish"
- a two part powdercoat finish, based on pipeline standards,
for installations in highly corrosive atmospheres.
- Lift Beams (2,000 lb.
capacity)
|
|
| |
|
| |
|
| |
|
The above photograph shows Brownie Leg Towers in various
sizes and used
as Support Towers.
|
| |
|
| |
|
|
